Available 24/7

Metal vs Asphalt Roofing in Clayton: Problems Solved

71caa1fd 19e8 4ca1 9c9c 4b0ea054519b

Choosing a roof in Clayton is rarely as simple as picking a color off a sample board. You are weighing upfront cost against how long the roof will actually last, how it handles Central Indiana hail, and whether your insurance carrier will play nice when a storm rolls through. Metal and asphalt are the two materials most homeowners end up comparing, and both have legitimate strengths. Both also have specific problems that catch people off guard after the install is done.

At Our Team, we have been installing roofs across Central Indiana since 2018, and we hold Owens Corning Preferred and Malarkey Certified status along with a BBB A+ rating. That means we see the failures, the warranty claims, and the long term performance of both systems. If your roof does not need replacement, we will tell you. But when it does, you deserve to know the real tradeoffs before you sign anything. The sections below are organized around the specific problems homeowners in Clayton run into with metal and asphalt, followed by how we actually solve them in the field. No sales fluff, just the honest breakdown you would get if you were standing in your driveway with one of our estimators.

Problem: Your Asphalt Roof Keeps Losing Shingles in Wind Events

Central Indiana sees straight line winds in the 50 to 70 mph range several times a year, and older three tab shingles or builder grade architecturals often start lifting well below their rated threshold. You walk the yard after a thunderstorm and find tabs in the grass. That is not just cosmetic. Every missing shingle exposes the underlayment and accelerates deck rot.

Solution: Upgrade to a Properly Nailed Class 4 Asphalt System

The fix is usually two parts. First, we install a Malarkey or Owens Corning Class 4 impact resistant shingle rated for 110 to 130 mph winds. Second, we hand nail or use calibrated guns with six nails per shingle in the nailing zone, not four. A huge percentage of the blow off calls we run on other contractors' work come back to high nails, short nails, or overdriven nails that cut through the mat. Proper fastening alone can double real world wind performance on an asphalt roof.

Problem: Your Metal Roof Is Oil Canning and You Hate Looking at It

Oil canning is that wavy, rippled look you see on flat metal panels, especially on long runs catching afternoon sun. It does not affect performance, but on a $35,000 to $70,000 standing seam investment, you expect it to look crisp. Homeowners in Clayton call us frustrated because the installer told them it was normal and walked away.

Solution: Specify Striations, Heavier Gauge, and Proper Clip Spacing

Oil canning is reduced, not eliminated, through three choices made before the metal ever ships:

  1. Use 24 gauge steel instead of 26 gauge on runs longer than 20 feet.
  2. Specify striations or minor ribs rolled into the pan during fabrication.
  3. Use floating clips at correct spacing so the panel can expand and contract without binding.

When we quote standing seam, we walk you through these spec choices on the front end so you know what you are getting.

Problem: You Cannot Tell if Your Quote Is Apples to Apples

Two contractors quote your Clayton home. One is $11,000, one is $18,000, both say asphalt. What gives?

Solution: Demand a Line Item Scope

Price gaps usually come from ice and water shield coverage, ridge vent type, starter strip quality, flashing replacement versus reuse, and whether decking repair is included or billed as a change order. Ask any contractor, including us, to put those line items in writing.

Problem: Metal Roof Noise During Rain and Hail

The old stereotype of metal roofs sounding like a snare drum during storms still scares people away. On a barn with exposed rafters, yes, it is loud. On a modern home, it should not be.

Solution: Deck, Underlayment, and Attic Assembly Matter

A metal roof installed over solid decking with synthetic underlayment and a properly insulated attic is typically quieter than asphalt. Here is how we build the assembly:

  1. Solid 7/16 inch or thicker OSB or plywood deck, no skip sheathing.
  2. High temp synthetic underlayment rated for metal.
  3. Insulated attic with R-49 or better, which also dampens sound.

Do those three things and the rain on your metal roof will sound about the same as rain on asphalt.

Problem: Mixing Metal Accents With Asphalt Field Looks Bad

A lot of Clayton homes have metal over porches, bay windows, or dormers with asphalt on the main roof. When those metal sections are the wrong profile, wrong color, or installed with exposed fasteners that rust, the whole roof looks cheap.

Solution: Match Profile and Color Intentionally

We treat accent metal as part of the overall design. Standing seam with hidden fasteners in a color that complements the shingle tone reads as a premium detail. Corrugated ag panel with exposed screws bleeding rust down your siding reads as deferred maintenance. The material choice is only half the job. The pairing is the other half.

Problem: Asphalt Granule Loss Is Clogging Your Gutters

You clean your gutters and find a half inch of black grit in the bottom. Those are the ceramic granules that protect the asphalt mat from UV. Some granule loss is normal in the first few months after install. Heavy ongoing loss means the shingle is aging out, was defective, or took hail damage you never noticed.

Solution: Free Inspection and an Honest Answer

This is where we earn trust or lose it. If your roof has five good years left, we will tell you to keep cleaning gutters and wait. If the mat is exposed across multiple slopes, replacement is the right call and we will document it with photos so you can make the decision with real information. For Clayton homeowners who had a storm come through in the last year, we also check whether the loss is impact related, which changes the insurance conversation entirely.

Getting an Honest Recommendation for Your Clayton Home

There is no universally correct answer between metal and asphalt. There is only the answer that fits your house, your timeline, and your budget. When Our Team inspects your roof, we tell you which system makes sense and, just as often, we tell you that your current roof has years of life left and does not need to be replaced at all. If you are weighing your options in Clayton, reach out for a straightforward assessment and a real quote on both materials so you can decide with the full picture in front of you.

Frequently Asked Questions

Is a metal roof worth the extra cost in Clayton?

If you plan to stay in your Clayton home 15 years or more, metal often pays off through skipped replacements and possible insurance discounts. For shorter stays, quality asphalt usually delivers better short-term value. Our Team can run both numbers for your specific house.

Can Our Team install metal over my existing shingles?

In some cases yes, but we inspect the decking first. If the plywood is soft, wavy, or water-damaged, we tear off and start clean. A metal roof only lasts as long as the structure beneath it, so we will not shortcut that step.

How long does a roof replacement take?

Most Clayton asphalt replacements finish in one to two days. Standing seam metal typically takes three to five days because panels are custom-formed and fastened with more precision. Weather can extend either timeline.

Do you offer warranties on both roof types?

Yes. As an Owens Corning Preferred and Malarkey Certified contractor, Our Team offers manufacturer warranties up to 50 years on qualifying asphalt systems, plus our workmanship warranty. Metal systems carry their own paint and substrate warranties, which we walk through before you sign.

What if my roof does not actually need replacing?

Then we will tell you. We inspect honestly, and if a targeted repair or maintenance visit gets you another five to ten years, that is the recommendation you will receive. Selling roofs that do not need replacement is not how we built Our Team.